View RQL1001JLTL-E_1302644.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

RQL1001JLAQH
SiGe MMIC High Frequency Low Noise Amplifier
REJ03G1539-0100 Rev.1.00 May 16, 2007
Features
* Small SMD package CMPAK-6. * Ideal for wireless LAN(2.4 GHz / 5 GHz band), Cordless Phone, GPS antenna, IMS band applications * Low noise, High gain, NF = 1.2 dB, PG = 19.5 dB, f = 2.45 GHz NF = 2.1 dB, PG = 16.5 dB, f = 5.85 GHz * Having of power control terminal (Vctrl)
Outline
RENESAS Package code: PTSP0006JA-A (Package name: CMPAK-6)
4
6
5
2 1
3
1. RFout 2. GND 3. Vctrl 4. GND 5. RFin 6. GND
Note:
Marking is "JL".
Absolute Maximum Ratings
(Ta = 25C)
Item Supply Voltage Maximum Current Maximum Input Power Total Power Dissipation Operating Case Temperature Storage Temperature Note: Symbol VCC ICC Pin max Pt Tc(op) Tstg Ratings 4 20 +5 80 Note -10 to +85 -55 to +150 Unit V mA dBm mW C C
Value on PCB ( FR-4 : 40 x 40 x 1.6 mm double side )
REJ03G1539-0100 Rev.1.00 May 16, 2007 Page 1 of 8
RQL1001JLAQH
Electrical Characteristics
(Ta = 25C)
Item Noise Figure Symbol NF Min. -- -- Power Gain Input Return Lossnote1 Output Return Loss note2 1 dB Compression Point at output PG -- -- S11 -- -- S22 -- -- P1dB -- -- -- OIP3 -- +11 -- Typ 1.2 2.1 19.5 16.5 12 10 20 25 +3.5 +2 +13.5 Max. -- -- -- -- -- -- -- -- -- -- -- dBm dBm dB dB dB Unit dB Test Conditions f = 2.45 GHz, VCC = 3 V, Vctrl = 2.7 V f = 5.85 GHz, VCC = 3 V, Vctrl = 3.0 V f = 2.45 GHz, VCC = 3 V, Vctrl = 2.7 V f = 5.85 GHz, VCC = 3 V, Vctrl = 3.0 V f = 2.45 GHz, VCC = 3 V, Vctrl = 2.7 V f = 5.85 GHz, VCC = 3 V, Vctrl = 3.0 V f = 2.45 GHz, VCC = 3 V, Vctrl = 2.7 V f = 5.85 GHz, VCC = 3 V, Vctrl = 3.0 V f = 2.45 GHz, VCC = 3 V, Vctrl = 2.7 V f = 5.85 GHz, VCC = 3 V, Vctrl = 3.0 V f = 2.45 GHz, f = 1 MHz, VCC = 3 V, Vctrl = 2.7 V f = 5.85 GHz, f = 1 MHz, VCC = 3 V, Vctrl = 3.0 V
Third Order Intercept Point at output
Notes: 1, 2. Value on our specification circuit. (Refer to P.3, P.5)
Circuit Block Diagram
Pin 4 bias 3 1 2 5 2 3 4 6 1 5 6 Terminal RFout GND Vctrl GND RFin GND
REJ03G1539-0100 Rev.1.00 May 16, 2007 Page 2 of 8
RQL1001JLAQH
2.45 GHz Characteristics
Vctrl = 2.7 V
C4 C5 10 pF 1000 pF
C8 1 uF
C8
C5 C4 R1
R1 1.5 k C1 3 pF RFin L1 1 nH
GND RFin GND Vctrl GND RFout
C1
C2 1 pF RFout
L1 C2
C3 1000 pF
C3
C6 C7 10 pF 1000 pF VCC = 3 V
C9 1 uF
C6 C7
C9
RQL 1 0 0 1
Component ID C1 C2 C3, C5, C7 C4, C6 C8, C9
Value 3 pF 1 pF 1000 pF 10 pF 1 F
Part Code CM05CH3R0C50AH CM05CH1R0C50AH CM05B102K50AH CM05CH100J50AH F921A105MPA
Tolerance -0.25 to +0.25 pF -0.25 to +0.25 pF -10 to +10% -5 to 5% -10 to +10%
Rated Voltage 50 V
Manufacture KYOCERA
10 V
NICHICON
Component ID L1
Value 1 nH
Part Code LL1005-FHL1N0S
Tolerance -0.3 to 0.3 nH
Imax 500 mA
Manufacture TOKO
Component ID R1
Value 1.5 k
Part Code RK73B1ETTD152J
Tolerance -5 to +5%
Power Rating 0.063 W
Manufacture KOA
REJ03G1539-0100 Rev.1.00 May 16, 2007 Page 3 of 8
RQL1001JLAQH
Pin - Pout Characteristics
30 30 PG 20 10 Pout 0 -10 -20 -30 -40 15 10 VCC = 3 V Vctrl = 2.7 V f = 2.45 GHz -30 -20 -10 0 5 0 25 20 20
3rd. Order Intermodulation Distortion
VCC = 3 V Vctrl = 2.7 V
Output Power Pout (dBm) Power Gain PG (dB)
Pout / IMD3 (dBm)
0 f = 2.45 GHz Fundamental -20 (1 tone)
Iope (mA)
-40 IMD3 -60 (2 tone: f = 1 MHz)
Iope
-80 -40
-30
-20
-10
0
Input Power Pin (dBm)
Input Power Pin (dBm)
Power Gain, Noise Figure vs. Frequency
30 25 PG 20 15 NF 10 5 0 2.0 VCC = 3 V Vctrl = 2.7 V 2.5 1.0 0.5 0.0 3.0 2.0 1.5 3.0 25
Power Gain, Noise Figure vs. Control Voltage
5
Noise Figure NF (dB)
20
4
15
3
10 NF 5 0 1.5 VCC = 3 V f = 2.45 GHz 2.0 2.5 3.0
2
1 0 3.5
Frequency f (GHz)
Control Voltage Vctrl (V)
S Parameter vs. Frequency
20 S21
S Parameter vs. Frequency
.8 .6 .4 1 1.5 2 3 .2
10
S Parameter (dB)
S22
S11
.2 .4 .6 1.5 2 3 45
4 5 10
0
0
-10 S22 -20 -30 1 2 3
S11
-.2
-10 -5 -4 -3 -.4 -2 -.6 -1.5 -1
VCC = 3 V Vctrl = 2.7 V 4
-.8
Frequency f (GHz)
Test condition : VCC = 3 V, Vctrl = 2.7 V 2.0 to 3.0 GHz (0.1 GHz step)
REJ03G1539-0100 Rev.1.00 May 16, 2007 Page 4 of 8
Noise Figure NF (dB)
Power Gain PG (dB)
Power Gain PG (dB)
2.5
PG
RQL1001JLAQH
5.85 GHz Characteristics
Vctrl = 3.0 V
C10
C6 C7 10 pF 1000 pF C10 1 uF
C7 C6 R1
R1 1.5 k C2 1000 pF RFin C1 1 pF
GND RFin GND Vctrl GND RFout
C2
C3
RFout C3 0.4 pF C4 0.5 pF
C1
C4 C5
C5 1000 pF
C8 C9
C8 C9 10 pF 1000 pF VCC = 3 V C11 1 uF
C11
RQL 1 0 0 1
Component ID C1 C2, C5, C7, C9 C3 C4 C6, C8 C10, C11
Value 1 pF 1000 pF 0.4 pF 0.5 pF 10 pF 1 F
Part Code CM05CH1R0C50AH CM05B102K50AH CM05CH0R4C50AH CM05CH0R5C50AH CM05CH100J50AH F921A105MPA
Tolerance -0.25 to +0.25 pF -10 to +10% -0.25 to +0.25 pF -0.25 to +0.25 pF -5 to 5% -10 to +10%
Rated Voltage
Manufacture
50 V
KYOCERA
10 V
NICHICON
Component ID R1
Value 1.5 k
Part Code RK73B1ETTD152J
Tolerance -5 to +5%
Power Rating 0.063 W
Manufacture KOA
REJ03G1539-0100 Rev.1.00 May 16, 2007 Page 5 of 8
RQL1001JLAQH
Pin - Pout Characteristics
30 30 PG 25 20
3rd. Order Intermodulation Distortion
Vcc = 3 V
Output Power Pout (dBm) Power Gain PG (dB)
20 10 0 -10
Iope (mA)
20 Pout 15 10 Iope Vcc = 3 V Vctrl = 3 V f = 5.85 GHz -30 -20 -10 0 5 0
Pout / IMD3 (dBm)
Vctrl = 3 V 0 f = 5.85 GHz -20
Fundamental (1 tone)
-40
-20 -30 -40
-60 -80 -40
IMD3 (2 tone: f = 1 MHz)
-30 -20 -10 0
Input Power Pin (dBm) Power Gain, Noise Figure vs. Frequency
30 25 20 15 PG 10 5 0 5.0 VCC = 3 V Vctrl = 3 V 5.5 1.0 0.5 0 6.0 NF 3.0 2.5 2.0 1.5 25
Input Power Pin (dBm) Power Gain, Noise Figure vs. Control Voltage
5 PG
Noise Figure NF (dB)
Power Gain PG (dB)
Power Gain PG (dB)
20
4
15
3
10 NF 5 VCC = 3 V f = 5.85 GHz 0 1.5 2.0 2.5 3.0 3.5
2
1 0 4.0
Frequency f (GHz)
Control Voltage Vctrl (V)
S Parameter vs. Frequency
20 S21 10
S Parameter vs. Frequency
.8 .6 .4 3 .2 1 1.5 2
S Parameter (dB)
S11
4 5 10 1.5 2 3 45 -10
0 S11 -10 S22 -20 -30 5.0 VCC = 3 V Vctrl = 3 V 5.5 6.0 6.5 7.0
-.4 -.2 0 .2 .4 .6
S22
-5 -4 -3 -2 -.6 -.8 -1 -1.5
Frequency f (GHz)
Test condition : VCC = 3 V, Vctrl = 3 V 5.0 to 6.0 GHz (0.1 GHz step)
REJ03G1539-0100 Rev.1.00 May 16, 2007 Page 6 of 8
Noise Figure NF (dB)
RQL1001JLAQH
Evaluation Board
f = 2.45 GHz
RQL 1 0 0 1
f = 5.85 GHz
RQL 1 0 0 1
REJ03G1539-0100 Rev.1.00 May 16, 2007 Page 7 of 8
RQL1001JLAQH
Package Dimensions
Package Name CMPAK-6 JEITA Package Code SC-88 RENESAS Code PTSP0006JA-A Previous Code CMPAK-6 / CMPAK-6V MASS[Typ.] 0.006g
D e
A Q c
E
HE LP L
A xM
A S A b
L1
A3 e
Reference Symbol
Dimension in Millimeters
A2
A
yS b
A1 S e1
l1 c b2 A-A Section Pattern of terminal position areas
A A1 A2 A3 b c D E e HE L L1 LP x y b2 e1 l1 Q
Min 0.8 0 0.8 0.15 0.1 1.8 1.15 2.0 0.3 0.1 0.2
Nom 0.9 0.25 0.2 0.15 2.0 1.25 0.65 2.1
Max 1.1 0.1 1.0 0.25 0.25 2.2 1.35 2.2 0.7 0.5 0.6 0.05 0.05 0.35 0.9
1.5 0.25
Ordering Information
Part Name RQL1001JLTL-E Note: Quantity 3000 pcs Shipping Container 178 mm reel, 8 mm emboss taping
For some grades, production may be terminated. Please contact the Renesas sales office to check the state of production before ordering the product.
REJ03G1539-0100 Rev.1.00 May 16, 2007 Page 8 of 8
Sales Strategic Planning Div.
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Notes: 1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any other rights of Renesas or any third party with respect to the information in this document. 2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including, but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples. 3. You should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass destruction or for the purpose of any other military use. When exporting the products or technology described herein, you should follow the applicable export control laws and regulations, and procedures required by such laws and regulations. 4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas products listed in this document, please confirm the latest product information with a Renesas sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas such as that disclosed through our website. (http://www.renesas.com ) 5. Renesas has used reasonable care in compiling the information included in this document, but Renesas assumes no liability whatsoever for any damages incurred as a result of errors or omissions in the information included in this document. 6. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability of such information to the intended application. Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular application and specifically disclaims any liability arising out of the application and use of the information in this document or Renesas products. 7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas products are not designed, manufactured or tested for applications or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or undersea communication transmission. If you are considering the use of our products for such purposes, please contact a Renesas sales office beforehand. Renesas shall have no liability for damages arising out of the uses set forth above. 8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below: (1) artificial life support devices or systems (2) surgical implantations (3) healthcare intervention (e.g., excision, administration of medication, etc.) (4) any other purposes that pose a direct threat to human life Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use Renesas products in any of the foregoing applications shall indemnify and hold harmless Renesas Technology Corp., its affiliated companies and their officers, directors, and employees against any and all damages arising out of such applications. 9. You should use the products described herein within the range specified by Renesas, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or damages arising out of the use of Renesas products beyond such specified ranges. 10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 11. In case Renesas products listed in this document are detached from the products to which the Renesas products are attached or affixed, the risk of accident such as swallowing by infants and small children is very high. You should implement safety measures so that Renesas products may not be easily detached from your products. Renesas shall have no liability for damages arising out of such detachment. 12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from Renesas. 13. Please contact a Renesas sales office if you have any questions regarding the information contained in this document, Renesas semiconductor products, or if you have any other inquiries.
RENESAS SALES OFFICES
Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900 Renesas Technology (Shanghai) Co., Ltd. Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120 Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7898 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2730-6071 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 Renesas Technology Korea Co., Ltd. Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145
http://www.renesas.com
Renesas Technology Malaysia Sdn. Bhd Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: <603> 7955-9390, Fax: <603> 7955-9510
(c) 2007. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon .7.0

▲Up To Search▲

Price & Availability of RQL1001JLTL-E

	To Download RQL1001JLTL-E Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .